How to Recondition Wiper Blades | A Step-by-Step Guide

Wipers are an essential part of any car. Without them, it would not be easy to keep your windshield clean. Wiper blades can go through a lot of wear and tear over time. If you’re having trouble with wipers cutting the water properly, it may be time to take them in for reconditioning. There are many ways for knowing how to Recondition Wiper Blades, depending on your level of expertise. You can replace them if they’re worn out or attempt to fix them if they’re not.

How to Recondition Wiper Blades

Wiper blades are one of the essential components of a vehicle, especially during the rainy season. But over time, they can become worn out and ineffective in clearing your windshield. The good news is that you don’t need to replace them every time they stop working correctly. You can recondition your wiper blades and extend their lifespan with simple steps.

How to Recondition Wiper Blades | A Step-by-Step Guide

The general guideline for restoring the wiper blades is mentioned below.

  • Ld wiper blades often contain mold and residue that can be hard to remove. Always wipe off any mold or residue before installing new blades.
  • If you don’t have sandpaper, use a scouring pad to remove the rust. It takes a little more time, but it works.
  • Baking soda is a great way to clean your car. It will remove any dirt, grime, dried sweat, or rainwater. Pour a quarter baking soda beaker into a plastic bag, and wrap your wiper blades. You can put newspaper or a plastic bag on your car but ensure the edges don’t touch anything!
  • After tying the bag off, it will be super fresh and clean! I can quickly grab what I need without any spills or messes.
  • The blades on your car must be replaced every 7,500 miles or when the car’s manufacturer recommends.
  • I always take the wiper blades off before I drive, just in case of rain or snow on the windshield. 
  • Wiping your windshield is essential to keep the glass clean and avoid getting debris and water on the inside of the glass. 
See also  How to Change from Intrastate to Interstate | Step-by-Step Guide

More Techniques to Recondition Your Wiper Blades

How to Recondition Wiper Blades | A Step-by-Step Guide

Many people replace their wiper blades whenever they get a new car, but there are many ways to keep them working well.

Straightening Tool

Wiper blades are essential for every vehicle, especially during the rainy season. The smooth functioning of wiper blades ensures a clear view of the road while driving, ensuring safety for everyone on board. One popular method of reconditioning your wiper blades is a straightening tool. This device is designed to straighten the bent metal and can be used on car parts such as wipers that have become misshapen from use or lack thereof. To use the tool on your blade, hold it firmly by the bottom end and place it between the straightening tool’s jaws before squeezing gently.

If you’re experiencing streaks or smears on your windshield while using your wipers or notice that they’re not working as well as they used to, it might be time for a replacement. You often don’t have to replace the entire wiper system when it starts to falter. Instead, you only need a new set of blades – and a little know-how! First, remove the old blades from their holders by pulling them away from the arm gently but firmly.

Wiper Fluid

The wiper blades of our vehicles are some of the essential components we need to maintain. It is only possible to drive correctly in bad weather with them. It is crucial to recondition these vital parts regularly. Failure to do so could lead to reduced visibility on the road and increased risk of accidents. It would help if you remembered never to spray any liquid directly onto the edges when cleaning your wiper blades. This simple mistake can cause irreversible damage, affecting their performance when you need them the most.

Instead, remove the blades from their arms and clean them using a soft cloth or paper towel soaked in water. Improper use of wiper fluid can cause significant damage to your car’s exterior and the wipers themselves. Wiper fluid contains chemicals that can corrode metal parts and paint jobs. Applying it to a car’s body or windows will leave unsightly stains and damage your vehicle over time. Cleaning the blades will help maintain their effectiveness in removing debris from your windowpanes.

See also  How Do I Find My RPO Code by VIN | Step-by-Step Guide

Another tip for reconditioning your wiper blades is to use a rubber conditioner every three months. It helps keep them supple and flexible, ensuring they properly contact your windshield during use. windshields are a necessary part of any car. If you don’t know about windshields, stay here for more information about Windshield Wiper’s Arm and Defog Windshield.

Compressed Air

Over time, wiper blades can become worn out, leading to problems like streaking and squeaking. It could make it challenging to see the road clearly and safely. Luckily, There’s a simple trick for reconditioning your wipers that doesn’t require you to visit a mechanic or buy new ones. All you need is some rubbing alcohol and a clean cloth! Start by soaking the cloth in rubbing alcohol and then thoroughly wipe down both sides of your wipers’ rubber blades. 

The alcohol will help remove dirt, grime, or debris accumulated on the blade’s surface. You’ll be surprised at how much cleaner they look afterward! Do you constantly find yourself replacing them every few months? Well, we have a solution for you! By following these simple steps, you can extend the life of your wiper blades and improve their performance. 

  • Attach the wiper blades to your windshield as usual. Then, hold some compressed air about 6 inches away from the rubber. 
  • Spray the compressed air for 10 seconds until all debris and dust are removed from the rubber. 
  • It is essential to ensure that no dirt or grime is left on the rubber before moving on to the next step.
  • Once all debris has been cleared off with compressed air, wipe down the rubber with a dry cleaning cloth. 
  • It will return it to a silky smooth coating which will help it glide effortlessly over your windshield without causing any scratches or marks.

Silicone Lubricant:

Did you know that regularly applying silicone lubricant on your wiper blades can keep them in top-notch condition? Yes, it’s true! You can ensure they stay smooth and flexible by rubbing a silicone lubricant into your wiper blade once every three months.

See also  How to Close the Spark Plug Gap | an in-Depth Detailed Guide

The process is simple; you only need to apply the silicone lubricant onto the wiper blade and let it sit for about 15 minutes. Afterward, wipe away any excess lubricant with a clean cloth or paper towel. The best thing about using silicone instead of oil is that it doesn’t evaporate or dry out quickly, making it ideal for protecting rubber components like windshield wipers.

Vinegar and Water

If your wiper blades can become faded, chipped, or cracked due to exposure to different weather conditions and debris on the roads. It not only affects their performance but also reduces their lifespan. But before you rush out to buy new wiper blades, there’s an easy and cost-effective solution that can help recondition them and an easy procedure for getting rid of the vinegar smell in the car! Remove the blade from the arm and soak it in a bowl filled with equal parts of vinegar and water for about 15 minutes. Afterward, brush off any remaining debris with a soft-bristled brush before putting it back on the arm. Voila! Your wiper blades will look as good as new!

Conclusion

Wipers are often an overlooked part of our cars, but they play a crucial role in ensuring our safety on the road. In adverse weather conditions, such as rain or snow, wiper blades help maintain visibility and prevent accidents from happening. We hope you learned how to recondition wiper blades and that this information will help you keep your car safe on the road. If your wipers are not performing as they should, it is time to take action and recondition them. We want to remind you to always check your wiper blades for defects and replace them when necessary.

Frequently Asked Questions

How do I know if I need new wipers?

It’s a good idea to inspect your wipers every month and replace them if they’re worn out, or the blade needs to be cut correctly.

How do I get the best price on wipers?

Some tips to help get the best price on wipers include checking online reviews and comparing prices at local stores. It may be worthwhile to ask a mechanic or car dealership if they have any coupons or discounts available for wipers.

How do I know if my Wiper Blades are Reconditioned?

If you notice any strange smells or noises coming from your vehicle’s wiper system, having them inspected by a mechanic might be a good idea.